About this deal
Attentions for resistive load applications:
If you need the inverter to run the resistive load (like laptops, TVs, electric cookers, lights), please choose the inverter with continuous power higher than the appliance's rated power. It is better to use 80% of the rated power. If you use refrigerators, freezers, microwaves, water pumps, air conditioners and other appliances with compressors or motors,please choose the inverter whose continuous power is 3-7 times higher than your appliances. For example, for the power inverter with continuous power 2500w, it is suggested to run the appliance with rated power less than 2500w.
WZRELB Pure Sine Wave Inverter
- 5000W (surge 10000W) pure sine wave inverter, with 4 cables with cable lug terminals, manual, and fuses.
- 0mm) PCB which greatly enhances the load capacity of the inverter,high quality mosfets and true copper inductance work together to make perfect pure sine wave AC output.
- Perfect sine wave perfects the performance-- equipped with extra thick (2.
- Monitor power usage with no effort-- LED Display for both DC volt and AC volt which makes the power usage clear for users,a good source of backup power supply for off grid system or emergency like power failure
- Silent cooling system-- intelligent silent fans cools the inverter down automatically without any annoying noise.
- There is rational and sufficient design of heat sink inside.
Reviews
Rex
Overall, it was a good buy but it seems to me to be less trouble if you get an Inverter with an isolated output from the get go instead of one with a tranformer with 60v on each side of ground to make 120v. Works fine and there is no stray AC voltages between receptacles and the outlets all put out 120 from hot to netral . That would seem to me to make wiring a lot simpler.
Greg
Basically it will run anything except my EV charger on the receptales included because it requires a NG bond. c) Some of the inverters come with a wired remote, allowing you to turn the inverter ON/OFF from a remote location (just a few feet though). From Hot terminal to Neutral terminal read 120v.
Aldo
Now I can bond the NG at the terminals when using locally disconnected from my panel service. Provides clean power so that my LED lights do not flicker. 5kw.
Everyone's_a_critic
(THIS ITEM UNDER REVIEW)This inverter behaved well. It is wired backwards from US outlets but will work as the ground is floating on them and the 120v appears accross the 2 pins so I just taped them over to not use. Included here is a picture of my mobile cart setup.
JMatt
Moreover, this unit too was missing the cover over the bare AC terminals. But I would point out that is only PEAK power.
Amazon Customer
For one, the Amazon photos show a plastic cover for the bare AC leads provided on the front of the inverter. 25A is max for a continuous load.